A common requirement when fitting any exhaust is an adapter sleeve to enlarge or reduce the bore.
- 304 Stainless steel polished to a mirror finish (304 is the highest grade as used in the food and marine industry - most stainless exhaust components are 409 grade)
- Smooth (not stepped) for best gas flow - furthermore a single bore change of the exact dimensions required reduces exhaust turbulence relative to the more common twin step reducers
- Can be clamped or welded
Sizes quoted are the outside diameter. The side wall is approx 1.5mm thick so for example on part number EA51-57 has an outside diameter of 51mm on the small end and 57mm on the large end which gives 48mm internal diameter on the small end and 54mm on the large end.
Length is approx 5" (130mm)