Already registered? Enter your email and password:First Visit?Create an account
Shop
Search Your Cart
Bulk Buyers & Traders
We are the manufacturers or importers of many of the products featured here and thus can offer the bulk buying discounts offered here.
Please note that if you are reading this on our mobile optimised site you will have to revert to the full site to see pricing.

Note that prices quoted include VAT tax, if VAT is not payable by you then it will be removed when you check-out.
If you require a bulk-buy price on any of our other products then please contact us

We would also advise you to join our trade newsletter here to keep in touch & receive our latest trade price lists
(Code: 334)
£0.22
In Stock
Badge ClipPlastic clip to hold extruding 1/8" badge pins into panel hole. Universal application
Discount on quantity
From1020100
Discount5.00%10.00%39.00%
(Code: 230)
£0.41
In Stock
Hood Poppers (Material Inner Section)The top button section is fitted to the top of the material and this bottom socket section to the underside of the material. This then pops onto the base stud section.

Bright nickel finish
Bottom Socket
Discount on quantity
From1025100
Discount5.00%10.00%40.00%
(Code: 70)
£0.41
In Stock
Hood Popper (Eyelet)This eyelet section is used in place of Material Inner Section stud in certain applications eg hood frame internal bar wrap around cloth section.

Bright nickel finish
Eyelet
Discount on quantity
From1025100
Discount5.00%10.00%40.00%
(Code: 965)
£0.48
In Stock
Hood Poppers (Material Outer Section)This top button section is fitted to the top of the material and the bottom socket section to the underside of the material. This then pops onto the base stud section.
The top button can be supplied in bright nickel or black enamelled

Top Button
Discount on quantity
From1025100
Discount5.00%10.00%40.00%
(Code: 69 Nickel)
£0.56
In Stock
Door Weatherseal ClipSteel weatherseal clip. Holds the rubber door weatherstrip (the seal between the door and the door glass) onto the door
Original equipment for many UK 50s to 80s UK vehicles including BL, Jaguar, MG, Triumph etc.
Discount on quantity
From1020100
Discount5.00%10.00%39.00%
(Code: 229)
£0.56
In Stock
Door Trim Pad ClipSteel door trim pad clip. Snap fit into 1/4" panel hole. Original equipment for many UK 50s to 80s UK vehicles including BL, Jaguar, MG, Triumph etc.
Discount on quantity
From1020100
Discount5.00%10.00%39.00%
(Code: 228)
£0.59
In Stock
Turnbutton Fixing (Eyelet & Clinch Section)Two hole fixing
Material Section - material is placed between these 2 sections.
Nickel plated brass
Discount on quantity
From101550100
Discount10.00%25.00%39.00%69.00%
(Code: 672)
£0.77
In Stock
Hood Poppers (Body Section - Base Stud)The top button section is fitted to the top of the material and the bottom socket section to the underside of the material. This then pops onto this base stud. The base stud can be fitted with either rivets of self-tapping screws

Bright nickel finish
Base Stud
Discount on quantity
From1025100
Discount5.00%10.00%40.00%
(Code: 71)
£0.99
In Stock
Battery Isolator Scrutineering StickerSelf adhesive on underside.
Meets FIA & MSA regulations
Measures 100mm each side
Discount on quantity
From251050100
Discount10.00%12.00%20.00%40.00%45.00%
(Code: 995)
£1.19
In Stock
Turnbutton Fixing (Turnbutton Section)Two hole fixing
Body Section
Nickel plated brass
Discount on quantity
From101550100
Discount10.00%25.00%39.00%69.00%
(Code: 671)
£1.19
In Stock
Lift The Dot Self-TapperLift the Dot fastener with self-tapping screw.
Length 29mm
Discount on quantity
From1550100
Discount20.00%30.00%35.00%
(Code: 1000)
£1.19
In Stock
Lift The Dot WoodscrewLift the dot fastener with woodscrew base.
Length 32mm
Discount on quantity
From1550100
Discount20.00%30.00%35.00%
(Code: 1001)
£1.20
In Stock
Battery Isolator Key OnlySuits all standard type (not FIA type) battery isolators.
Good quality version with steel turn tab on base
Discount on quantity
From251050100
Discount10.00%12.00%20.00%40.00%45.00%
(Code: 835)
£1.20
In Stock
In Line Fuse HolderRobust black ABS in-line fuse holder. Screw thread enables splashproof construction (unlike commonly available white nylon push and turn type).
Supplied complete with 3A fuse but doubtless you will wish to fit your own fuse. Compatible with glass or ceramic fuses.
Suitable for adding alarm, lighting or any other ancillaries, or sorting electrical issues.
Discount on quantity
From2550
Discount10.00%25.00%45.00%
(Code: 1023)
£1.20
In Stock
Stainless Metal Tie 200mm LongUsed to attach the exhaust wrap to the manifold & exhaust.
Very strong & heat proof
200mm by 5mm
Best quality 304 grade stainless
(Code: 261EACH)
£1.32
In Stock
Lift The Dot Clinch Stud & BaseplateUsed for material to material fastening
Discount on quantity
From1550100
Discount20.00%30.00%35.00%
(Code: 1003)
£1.44
In Stock
Lift The Dot Machine ScrewLift the Dot fastener with M5 machine screw base.
Discount on quantity
From1550100
Discount20.00%30.00%35.00%
(Code: 1002)
£1.44
In Stock
Stainless Metal Tie 300mm Long
Used to attach the exhaust wrap to the manifold & exhaust.
Very strong & heat proof
300mm x 5mm
Best quality 304 grade stainless
(Code: 750 x 1)
£1.49
In Stock
H1 Halogen Bulb12V 55W

Discount on quantity
From10
Discount40.00%
(Code: H1H)
£1.92
In Stock
Lift The Dot Base Plate Twin HoleDouble thickness screw base stud. Countersunk screw holes for size 6 screws;
Hole centres 18mm
Base plate approx 26mm x 12mm x 2mm thick
Discount on quantity
From1550100
Discount20.00%30.00%35.00%
(Code: 998)
£1.92
In Stock
Lift The Dot Pronged Eyelet Socket & ClinchplateFemale (material) section
Discount on quantity
From1550100
Discount20.00%30.00%35.00%
(Code: 999)
£1.99
In Stock
FIA Battery Isolator Key OnlyShrouded key suits all FIA type battery isolators
Good quality version with brass turn tab on base.
Hole is for remote cable operation if required.
Discount on quantity
From251050100
Discount10.00%12.00%20.00%40.00%45.00%
(Code: 835/FIA)
£2.27
In Stock
In Line Blade Fuse HolderRobust black PVC in-line fuse holder. Cover enables splashproof construction.
Suitable for heavier duty applications up to 32 volts, 100 amps.
Suitable for adding alarm, lighting or any other ancillaries, or sorting electrical issues.
Discount on quantity
From2550
Discount10.00%25.00%45.00%
(Code: BFuse)
£2.28
In Stock
Seat Belt / Harness FIA Eye BoltUsed for fitting belts or harnesses to vehicle shell (floorpan, roll bar etc)
Universal fit
7/16" UNF thread size, 1" thread length
Discount on quantity
From10100
Discount20.00%50.00%
(Code: 667)
£2.40
In Stock
Battery Isolator Dust & Rain Cover
Spare dust & rain cover.
Suits all red key type isolators, standard & FIA type
Discount on quantity
From251050100
Discount10.00%12.00%20.00%40.00%45.00%
(Code: 1033)
£2.65
In Stock
Transparent Bodied Disposable Fuel Filter
Tough transparent nylon body lets you observe filtering action.
Super fine paper element filter keeps fuel clean and free from all contaminants
Replace at each service (or when visibly dirty)
Note that our version of these commonly-available filters have a galvanised steel reinforcement around the filter cone for structural rigidity, enhanced performance and longevity.
Fitment at each end is stepped allowing fitment to either 1/4" (6mm) or 5/16" (8mm) hose
35mm diameter, 100mm long including stub pipes

Discount on quantity
From10100
Discount30.00%70.00%
(Code: GFE7004)
£3.00
In Stock
H4 Halogen Bulb12V
60/55W
Discount on quantity
From10
Discount20.00%
(Code: 496)
£3.05
In Stock
Toggle Switch Stainless (Off/On)ABS base with stainless toggle
Contacts at side rather than base creates a slim profile (15mm) for fitments where available depth may be an issue
Require 12mm panel hole
12volt, maximum of 15 amp

Our best selling switch
Discount on quantity
From1025
Discount20.00%40.00%
(Code: 570)
£3.48
In Stock
Toggle Switch with Legend Plate (Off/On)ABS base with stainless toggle
Removeable legend plate - switch can be fitted with or without label
Requires 12mm panel hole
25 Amp
Discount on quantity
From1025
Discount20.00%40.00%
(Code: 679On/Off)
£3.48
In Stock
Toggle Switch with Legend Plate (On/On)ABS base with stainless toggle
Removeable legend plate - switch can be fitted with or without label
Suits relay changeovers, sidelights & headlights etc
Requires 12mm panel hole
25 Amp
Discount on quantity
From1025
Discount20.00%40.00%
(Code: 679On/On)
£3.52
In Stock
Battery Terminal Clamp Copper & Zinc ConstructionHeavy duty battery terminal clamps.
Good quality manufactured by Semat (not unbranded electro-plated Chinese imports).
Due to top quality copper construction clamps are flexible enough to fit both positive and negative terminals, and are labeled as such
Fasteners included.
Sold as a pair


Discount on quantity
From10
Discount40.00%
(Code: BT)
£3.70
In Stock
4 Pin Relay12Volt 30Amp 4 pin relay
Suitable uses being horns, spotlamps
Discount on quantity
From1050100
Discount20.00%40.00%49.00%
(Code: HR)
£3.70
In Stock
Edge Trim SmallDESCRIPTION: Push on PVC 'U' channel with internal lips for extra grip. Flexible segmented steel core. Hardwearing & washable.

USE: Universal - anything with an edge. (boat, car, aircraft, construction etc.) Will grip all edges 0.5mm to 2mm wide
Widely used for SVA purposes on kit car panels
Referred to as Titanfast seal in the marine industry
Black
Sold per metre
Discount on quantity
From100
Discount30.00%
(Code: SealEdgeTrimSmall)
£4.19
In Stock
Battery Terminal Clamp ExtenderElegantly solves the problem of messy terminal connections and makes it very easy to connect extra power (or earth) leads to the battery (without disturbing the already present connections)
Fits positive & negative terminals.
Easy & reliable direct connection to battery
Stud will accommodate one or several ring terminals
Solid brass construction
10.5mm stud length, overall length 35mm

Fits all standard 5/16" battery clamp threads including Ford square terminal types - may not fit small lawnmower or motorbike battery clamps
Fits positive & negative terminals.
Sold individually
Discount on quantity
From10
Discount40.00%
(Code: BTCE)
£4.20
In Stock
Flasher Relay 2 Pin2 pin 12v flasher relay
21w x 2
As Lucas SFB114 / SFB115 / SFB130 / GFU2124
Discount on quantity
From1050100
Discount20.00%40.00%49.00%
(Code: 878)
£4.20
In Stock
Battery Terminal Clamp CoversPair PVC Battery Terminal Clamp Covers.
Suit square terminal clamps
Maximum input cable diameter 20mm

Discount on quantity
From10
Discount40.00%
(Code: BTCCS)
£4.80
In Stock
Edge Trim LargeDESCRIPTION: Push on PVC 'U' channel with internal lips for extra grip. Flexible segmented steel core. Hardwearing & washable.

USE: Universal - anything with an edge. (boat, car, aircraft, construction etc.) Will grip all edges 0.5mm to 4mm wide
Widely used for SVA purposes on kit car panels
Referred to as Titanfast seal in the marine industry
Black
Sold per metre
Discount on quantity
From100
Discount30.00%
(Code: SealEdgeTrimLarge)
£4.80
In Stock
Flasher Relay 3 Pin3 pin 12v flasher relay
21w x 2
As Lucas SFB105 / GFU2103 / GFU103
Discount on quantity
From1050100
Discount20.00%40.00%49.00%
(Code: 879)
£5.29
In Stock
Battery IsolatorBattery isolator (also known as cut-off or kill switch)

A very simple way to isolate vehicle electrics. Can be used either as an Anti-Theft device or to isolate either the starter battery from the rest of the vehicle or auxiliary batteries from the charging system.
(Code: 967-177967)
£5.40
In Stock
Union Jack Enamel Badge Self AdhesiveBest quality enamel die cast badges
Measures 38mm wide, 22mm high, 2mm deep
Discount on quantity
From102550
Discount25.00%30.00%40.00%
(Code: 677)
£5.40
Manifold & Exhaust Bandage Wrap NaturalInsulating Wrap is an innovative way to create more horsepower and reduce under-bonnet temperatures.
Withstands intermittent temperatures of 2000 degrees F (1090C) and continuous temperatures of 1600 degrees F (870C).
Discount on quantity
From1025
Discount35.00%41.00%
(Code: 749746 1)
£5.40
In Stock
St George Cross Enamel Badge Self AdhesiveBest quality enamel die cast badges
Measures 38mm wide, 22mm high, 2mm deep
Discount on quantity
From102550
Discount25.00%30.00%40.00%
(Code: 677GC)
£5.40
In Stock
Union Jack Black & Chrome Enamel Badge Self AdhesiveBest quality enamel die cast badges
Measures 38mm wide, 22mm high, 2mm deep
Discount on quantity
From102550
Discount25.00%30.00%40.00%
(Code: 677/C)
£5.45
In Stock
Boot SealDESCRIPTION: Push on rubber 'U' section co-extruded with 1/2" (12.7mm) sponge rubber tube.
Flexible steel spine.

Fits over lips from 1.0 - 4.0mm wide
Seal compresses to less than 3mm to allow easy door, bonnet and boot closure.

As supplied for boot/tailgate seal for Classic Mini, Classic MG, Triumph as well as a whole host of other 60s & 70s British classics as well as being OE seal for MG mudguard scuttle.
It is also ideal as universal trunk / boot seal. Also lid / container weatherstrip, boat hatch seal etc.
Black
Sold per metre

Discount on quantity
From50100
Discount30.00%40.00%
(Code: SealBoot)
£5.45
In Stock
Door SealDESCRIPTION: Push on rubber 'U' section co-extruded with .47" (12mm) wide sponge rubber bulb.
Flexible steel spine.

 Fits over lips from1.0 - 4.0mm wide
Seal compresses to less than 3mm to allow easy door, bonnet and boot closure.

As supplied for Classic MG, Classic Mini, Land Rover, Triumph as well as generic universal use
Black
Sold per metre
Discount on quantity
From50100
Discount30.00%40.00%
(Code: SealDoor)
£5.75
In Stock
Lucas Type Toggle Switch (Off/On)Lucas type toggle switch as fitted to most British cars of the 50s, 60s, 70s. Also suitable universal fitment.
Robust build with ABS plastic on stainless housing with stainless bezel, copper rear contacts
Require 12mm panel hole
Off/On)
12volt, maximum of 25 amp
Discount on quantity
From1025
Discount20.00%40.00%
(Code: 487Off/On)
£5.95
In Stock
Anderson Connector Block CoverDesigned to keep water and mud out of the connector plug
Discount on quantity
From510
Discount10.00%25.00%
(Code: AND Cover)
£6.00
In Stock
 Washer JetAs Lucas WSB131 and WSB129
Takes standard 3/16" (4mm) tubing, requires (8mm) fitment hole.
Suitable for up to 4mm thick panels but can be bonded into thicker GRP panels.
Manufactured from stainless & chrome with brass locator.
Available as twin washer jet (2 nozzles in each body) or single washer jet (single nozzle in each body)

Discount on quantity
From102550
Discount25.00%30.00%40.00%
(Code: 23)
£6.12
In Stock
Battery Quick DisconnectBattery terminal & isolator assembly
Fits all standard top post batteries including Ford square type - note will not fit small terminal motorbike batteries
Install on battery terminal post & simply connect battery cable to back of the switch
To engage power just hand tighten the green knob and just slightly loosen the green knob to disconnect all power. The green knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing
Ideal for classic vehicles which can suffer from "leaky" earths, slowly draining batteries.
140Amp continuous at 12V, 500Amp momentary (10 seconds)
12 volt or 24 volt

Click pic for fitted example
Discount on quantity
From251050100
Discount10.00%12.00%20.00%40.00%45.00%
(Code: 182)
 
Follow @RatSport