| |  When replacing a coil you need to know:
- If your electrical system is 6 volt or 12 volt.
- If your ignition circuit is standard non-ballasted or ballasted (vehicles prior to mid 1970s tend to have standard circuits, later vehicles tend to have ballasted systems, up to late 1980s when coil packs started being used).
- If your high tension coil lead is a push in or vintage type screw in - all coils listed here are push-in unless stated otherwise.
- All our coils are the standard 55mm diameter, this is the standard size for vehicles except for some classic motorbikes which originally took a 48mm diameter coil.
- If you have electronic ignition fitted we would advise fitment of part code DLB193 or DLB105 or DLB105V to make the most of your electronic system.
(Code: Which Coil?) |
|
| |  Ceramic ballast resistor
1.6 ohms to suit standard ballasted 1.5 ohm coils
Fairly universal fitment for cars manufactured in the 60s/70s/early 80s - part numbers include 134176A, C32578 (Code: 567) |
|
| |   Highly polished stainless
Universal fit for all standard 55mm diameter round coils (Code: GAC8470) |
|
| |  12 volt coil
Standard for non-ballasted ignition systems
55mm diameter
Supplied with fitting bracket & fitting hardware
As Lucas DLB101 / GCL110 / LA12| Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: DLB101) |
|
| | 12 volt coil
for use on ballast system where a resistor or resistance wire is used
55mm diameter
Supplied with fitting bracket & fitting hardware
As Lucas DLB102 / GCL111 / GCL132 / HA12 | Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: DLB102) |
|
| | 6 volt coil
Standard for standard non-ballasted ignition systems
55mm diameter
Supplied with fitting bracket & fitting hardware
| Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: 6VC) |
|
| |  6 volt coil
Standard for standard non-ballasted ignition systems, screw top fitting
55mm diameter
Supplied with fitting bracket & fitting hardware
As Lucas DLB112, 47275 QH/CI XIC8001
| Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: DLB112) |
|
| | 12 volt coil
Standard for standard non-ballasted ignition systems, screw top fitting
55mm diameter
Supplied with fitting bracket & fitting hardware
As Lucas DLB100, 47275 QH/CI XIC8002
| Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: DLB100) |
|
| |  12 volt coil
55mm diameter
Supplied with fitting bracket & fitting hardware
As Lucas DLB193
This coil is specified for use with electronic ignition systems| Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: DLB193) |
|
| |   Highly polished stainless
Universal fit for all standard 55mm diameter round coils(Code: COILCLAMPCOVER) |
|
| |   This coil supplies all the benefits of the latest modern dry ignition coil pack technology in a traditional classic "oil filled look" design:
- Quality dry coil interior
- Robust design
- Cannot leak (not oil filled)
- Can mount upside down or in any position
- Eliminates coil heat management problems
Higher voltage gives better, fatter spark, resulting in added power, smoother response and better fuel economy.
Eliminates misfires, reducing plug fouling
40,000 volt output.
Very low resistance 0.7 ohm
Supplied complete with bracket & fitting hardware.
Standard 55mm diameter.
Universal fitment for all non-ballasted ignition systems.
Suitable for standard (points) or electronic distributors.
(Code: DLB105V) |
|
| |   Higher voltage gives better, fatter spark, resulting in added power, smoother response and better fuel economy.
Eliminates misfires, reducing plug fouling
40,000 volt output
Supplied complete with bracket & fitting hardware.
55mm diameter
Universal fitment for all non-ballasted ignition systems.
Suitable for standard (points) or electronic distributors
Lucas part number DLB105 (Code: DLB105) |
|
