Already registered? Enter your email and password:First Visit?Create an account
Shop
Search Your Cart

Battery Isolator Switches

In Stock
We supply a range of battery isolator switches to suit all applications.
All are suitable for 6 and 12 volt batteries, positive or negative earth. The heavy duty types are designed to be able to handle 24 volt, but will obviously cope with less voltage vehicles just as well.
Direct-fit-to-battery type isolators are designed for fitting on the earth terminal as fitting to the positive terminal carries a danger of sparking when activating.
As well as the well-known safety advantage of a battery switch (which is why they are mandatory when racing to FIA & MSA requirements), they also deliver these benefits:
  • Reduce risk of electrical shorts & fires
  • Quickly isolate your battery for safe vehicle servicing
  • Discourages unauthorised use/theft (remove key)
  • Cures slow battery drain which can be a problem on vehicles only used intermittently or stored for extended periods
(Code: Batteryswitchadvice)
£0.99
In Stock
Battery Isolator Scrutineering StickerSelf adhesive on underside.
Meets FIA & MSA regulations
Measures 100mm each side
Discount on quantity
From251050100
Discount10.00%12.00%20.00%40.00%45.00%
(Code: 995)
£1.20
In Stock
Battery Isolator Key OnlySuits all standard type (not FIA type) battery isolators.
Good quality version with steel turn tab on base
Discount on quantity
From251050100
Discount10.00%12.00%20.00%40.00%45.00%
(Code: 835)
£1.67
In Stock
Battery Isolator Dust & Rain Cover
Spare dust & rain cover.
Suits all red key type isolators, standard & FIA type
Discount on quantity
From251050100
Discount10.00%12.00%20.00%40.00%45.00%
(Code: 1033)
£1.99
In Stock
FIA Battery Isolator Key OnlyShrouded key suits all FIA type battery isolators
Good quality version with brass turn tab on base.
Hole is for remote cable operation if required.
Discount on quantity
From251050100
Discount10.00%12.00%20.00%40.00%45.00%
(Code: 835/FIA)
£5.29
In Stock
Battery IsolatorBattery isolator (also known as cut-off or kill switch)

A very simple way to isolate vehicle electrics. Can be used either as an Anti-Theft device or to isolate either the starter battery from the rest of the vehicle or auxiliary batteries from the charging system.
(Code: 967-177967)
£6.12
In Stock
Battery Quick DisconnectBattery terminal & isolator assembly
Fits all standard top post batteries including Ford square type - note will not fit small terminal motorbike batteries
Install on battery terminal post & simply connect battery cable to back of the switch
To engage power just hand tighten the green knob and just slightly loosen the green knob to disconnect all power. The green knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing
Ideal for classic vehicles which can suffer from "leaky" earths, slowly draining batteries.
140Amp continuous at 12V, 500Amp momentary (10 seconds)
12 volt or 24 volt

Click pic for fitted example
Discount on quantity
From251050100
Discount10.00%12.00%20.00%40.00%45.00%
(Code: 182)
£7.08
In Stock
Battery Quick Disconnect Ring TerminalBattery terminal & isolator assembly
Fits all standard top post batteries including Ford square type - note will not fit small terminal motorbike batteries
Install on battery terminal post & simply connect battery cable to ring terminal back of the switch
To engage power just hand tighten the purple knob and just slightly loosen the knob to disconnect all power. The knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing
Ideal for classic vehicles which can suffer from "leaky" earths, slowly draining batteries.
140Amp continuous at 12V, 500Amp momentary (10 seconds)
12 volt or 24 volt

Discount on quantity
From10
Discount20.00%
(Code: 182/R)
£7.20
In Stock
Battery Quick Disconnect InlinePower isolator assembly
Installs in line on battery lead or solenoid lead
Suits motorbikes and other vehicles where battery itself is inaccessible or space is tight.
To engage power just hand tighten the knob and just slightly loosen the knob to disconnect all power. The knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing
Ideal for classic vehicles which can suffer from "leaky" earths, slowly draining batteries.
140Amp continuous at 12V, 500Amp momentary (10 seconds)
12 volt or 24 volt

Discount on quantity
From251050100
Discount10.00%12.00%20.00%40.00%45.00%
(Code: 182IFI)
£7.39
In Stock
Battery Quick Disconnect with Bypass FuseAs above but complete with inline fuse to enable continued operation of small drain circuits when battery is disconnected.
Maintains current to electrical items that continue to operate when ignition off (eg time clock, stereo memory settings)
15 amp fuse fitted
(Code: 547)
£10.80
In Stock
Battery Quick Disconnect Slimline with Bypass FuseBattery terminal & isolator assembley
Fits all top post batteries
Install on battery terminal post & simply connect battery cable to back of the switch
To engage power just hand tighten the knob; and just slightly loosen the green knob to disconnect all power. The knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing.
Slimline version is designed for modern vehicles or other vehicles which have limited room around the battery or for batteries located inside battery boxes - disconnect creates only a 27mm protrusion from battery terminal
Supplied complete with inline fuseholder to take your choice of fuse rating.
(Code: 711)
£11.35
In Stock
Lucas SSB106 Type Battery Isolator Classic TypeButterfly battery cut off switch
Fits 19 mm hole, 83mm height 42mm diameter.
Metal bodies
300Amp continuous at 12V, 1500Amp momentary (10 seconds)
12 volt or 24 volt
Discount on quantity
From10
Discount20.00%
(Code: 349)
£12.96
In Stock
Battery Quick Disconnect For Race, Motorbike & Other Small BatteriesBattery terminal & isolator assembly
Fits small terminal race and motorbike batteries (and other products fitted with motorbike type batteries such as ride on lawn mowers, go karts, buggies etc)
Install on battery terminal post & simply connect battery cable to back of the switch
To engage power just hand tighten the knob and just slightly loosen the knob to disconnect all power. The knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing
Ideal for any vehicle which are used irregularly as well as any vehicle suffering from a "leaky" earths, slowly draining batteries.
95Amp continuous at 12V, 300Amp momentary (10 seconds)
6 volt or 12 volt

(Code: 182/MB)
£16.60
In Stock
Battery Isolator Knife TypeHeavy duty isolator, often employed for marine & commercial & heavy plant use
ABS, copper, brass, construction, waterproof to SAEJ1171
Suits 12 or 24V
225A @24V continuous, 350A @ 24V for 10 seconds
Overall height 50mm, width left to right 96mm, depth front to back 68mm

(Code: 20138)
£16.80
Awaiting stock.
Battery Isolator Lever Type
Removable lever key on chain, waterproof cover.
Copper M10 terminals
Max load 1000A @ 12V for 5 seconds
150A continuous @ 12V
Heavy duty isolator, suits 12 and 24V
Discount on quantity
From21050
Discount10.00%20.00%30.00%
(Code: 1032)
£18.96
In Stock
Battery Isolator FIA Approved With Ceramic Resistor100Amp at 12volt continuous, 1000Amp for 10 seconds.
Built in secondary switch to isolate the ignition circuit - the main electrical circuit is earthed through a 3ohm 11watt resistor to prevent surge and protect modern vehicles with ECU controls.
Supplied with 1 key
Can be flush mounted to a panel (maximum 12mm thick).
Requires a mounting hole 22mm and 2 x 6.5mm bolt fixing holes 37mm apart
Suit 12volt & 24Volt
Discount on quantity
From21050
Discount10.00%20.00%30.00%
(Code: 568)
£19.20
In Stock
Battery Isolator Heavy Duty Marine TypeMarine Type Isolator - will control a bank of several batteries
12volt to 48volt
300A continuous, 1000A momentary (10 second) at 12V
Panel mounted
Overall height excluding removable knob 61mm, overall height when removal knob fitted 70mm, height above panel fitting surface when removal knob fitted 49mm (if panel mounted)
ABS, copper, steel construction, M8 posts
(Code: 627)
£23.40
In Stock
Battery Isolator Heavy Duty Marine Type 4 Position For Use With Twin BatteriesMarine Type Isolator - 4 position allows selection between battery one, battery two, both batteries, or off.
12volt to 48volt
200A continuous, 1000A momentary (10 second cranking) at 12V
Panel or surface mounted
Overall height including knob 74mm, by 68mm by 68mm
ABS, copper, steel construction, M8 posts
(Code: 627/T)
£28.80
In Stock
Battery Isolator Lucas Type SSB103This is a very good reproduction of the original Lucas battery isolator switch which is often seen on Austin Healeys and an option or period accessory on a wide range of British Classics.
Fits 43mm diameter mounting hole, M8 studs.
Max load 500A @ 12v. Continuous load 150A @12v


(Code: SSB103)
£40.80
In Stock
Battery Isolator Lucas SSB103The original Lucas battery isolator switch which is often seen on Austin Healeys and an option or period accessory on a wide range of British Classics.
Fits 43mm diameter mounting hole, M8 studs.
Max load 500A @ 12v. Continuous load 150A @12v


(Code: SSB103L)
 
Follow @RatSport