Already registered? Enter your email and password:First Visit?Create an account

Bill Hirsch Fuel Tank Sealant

(Code: 905 small)
Shopping Satisfaction
Size :
£63.89
In Stock
Add to cart
Bill Hirsch Fuel Tank Sealant
Bill Hirsch Gas Tank Sealant.
This American product is the best way to repair and restore your petrol or diesel tank. Simple application, includes extensive application information and product information sheet. Will seal pinhole leaks and seams and prevent rusting.
Once the liquid is poured inside it works by setting and lining the tank to form a "tank inside a tank"
Suitable for all fuels including ethanol and alcohol.
Suitable for steel, aluminium, stainless steel, fibreglass & ABS tanks.
Full instructions included.
According to the manufacturer it is "World's No. 1 Gas Tank Sealer. Impervious to all fuel types. Over 2,000,000 sold to date".
 
Choice of size:
16 US FL OZ (0.43 litre. Sufficient for up to 11 UK gallon tank
1 US Quart (0.94 litre). Sufficient for up 25 UK gallon tank



 Information sheet supplied by manufacturer:

BILL HIRSCH ALCOHOL/ ETHANOL RESISTANT GAS TANK SEALER

QUESTIONS AND ANSWERS

WHO IS GAS TANK SEALER USED BY?

PEOPLE WHO RESTORE, REBUILD, OR REPAIR CARS, BOATS OR ANY OTHER TYPE VEHICLE WITH A FUEL TANK; FIRMS

WITH FUEL STORAGE TANKS OR PEOPLE WHO HAVE A TANK THAT NEEDS REPAIRING.


WHAT KIND OF PROBLEMS REQUIRE GAS TANK SEALER?

1. TANKS THAT HAVE RUST INSIDE DUE TO YEARS OF NOT BEING USED.

2. TANKS THAT HAVE AN ACCUMULATION OF "GOO" OR SLUDGE INSIDE WHICH MUST BE REMOVED BEFORE COATING

WITH SEALER.

3. TANKS THAT MAY HAVE SEAM LEAKS OR PINHOLE LEAKS.

4. TANKS THAT MAY HAVE ANY OR ALL OF THE ABOVE PROBLEMS.


CAN A TANK BE TREATED WITHOUT REMOVING IT FROM THE VEHICLE?

IN MOST CASES, NO! ONCE IN A WHILE, IF A TANK HAS A MINOR PINHOLE LEAK AT THE BOTTOM AND YOU CAN SEE IT

FROM THE FILLER HOLE, IT MAY BE ABLE TO BE TREATED WITHOUT REMOVING THE TANK, BUT TO PROPERLY SEAL A

TANK, IT MUST BE REMOVED FROM THE VEHICLE.


WHY IS BILL HIRSCH'S GAS TANK SEALER THE BEST ON THE MARKET?

IT IS BETTER BECAUSE IT SEALS HOLES AND SEAMS FAR BETTER THAN ANY OTHER SEALER. IT HAS GREATER

STRENGTH AND AT THE SAME TIME HAS THE FLEXIBILITY THAT A PRODUCT OF THIS TYPE IS REQUIRED TO HAVE;

SOMETHING OTHER SEALERS DO NOT HAVE. IT IS A NON-POROUS COATING AND IS NOT AFFECTED BY ALCOHOL OR

FUEL MOST FUEL ADDITIVES. IT WILL WORK ON ALL TYPES OF TANKS SUCH AS STEEL, ALUMINUM, GALVANIZED, &

FIBERGLASS WHEREAS OTHER SEALERS WILL NOT WORK ON SOME OF THESE METALS . IT IS NOT A MOISTURE

CURED URETHANE PAINT THAT IS SOLD BY ONE U.S. COMPANY AS A GAS TANK SEALER. THEIR OWN ADVERTISING

TELLS YOU THAT IT IS MOISTURE CURED AND THAT ONCE YOU OPEN THE CAN YOU CANNOT RE-USE IT. THIS TYPE

OF SEALER, USUALLY A LIGHT GRAY OR SILVER WILL NOT STICK TO THE INTERIOR SURFACE OF MOST TANKS FOR

VERY LONG AND GENERALLY 6-12 MONTHS LATER, WILL BREAK AWAY FROM THE INSIDE OF THE TANK AND WILL

TURN INTO A FLOATING PLASTIC BAG INSIDE OF THE TANK. THAT TYPE OF ITEM WHILE BEING RESISTANT TO

ALCOHOL WAS NEVER INTENDED TO BE A TANK SEALER AND SHOULD NEVER BE USED IN A FUEL TANK.


DOES BILL HIRSCH'S GAS TANK SEALER HAVE " RUST INHIBITORS" THAT SOME OTHERS DO NOT HAVE?

ALL WHITE OR YELLOW SEALERS ON THE MARKET HAVE RUST INHIBITORS IN THEM. ONE PRODUCT SOLD AS A

SEALER, WHICH IS A MOISTURE CURED URETHANE, HAS NO RUST INHIBITORS IN IT AT ALL AND YOUR TANK CAN

RUST RIGHT UNDER THEIR COATING. THE MANUFACTURER CLAIMS THAT BECAUSE IT SEALS OUT MOISTURE, THAT IT

HAS RUST INHIBITORS. THIS IS NOT SO. YOUR TANK CAN RUST UNDERNEATH THAT TYPE OF COATING BECAUSE IT

ATTRACTS MOISTURE.


HOW MANY DIFFERENT KINDS OF GAS TANK SEALER ARE THERE?

THERE ARE REALLY ONLY 2 TYPES OTHER THAN BILL HIRSCH'S WHITE ALCOHOL RESISTANT SEALER. (1) A PVC

TYPE NON CURING YELLOW SEALER WHICH HAS BEEN IN USE FOR OVER 50 YEARS. IT HAS GREAT SEALING

QUALITIES, RUST INHIBITORS, AND REMAINS VERY FLEXIBLE. IT IS AN EXCELLENT SEALER, BUT NOT RECOMMENDED

WHERE FUELS CONTAINING ALCOHOL WILL BE USED, AS ALCOHOL WILL DISSOLVE THIS SEALER. (2) A MOISTURE

CURED URETHANE SOLD AS A SEALER BUT WHICH IS NOTHING MORE THAN A LIGHT GRAY OR SILVER PAINT. AS

DESCRIBED ABOVE, THIS PRODUCT HAS NO RUST INHIBITORS, WILL NOT ADHERE WELL TO SOME TANK INTERIORS

AND IS NOT RE-USABLE.


IS BILL HIRSCH'S GAS TANK SEALER "HAZARDOUS"?

ALL CHEMICAL PRODUCTS ARE HAZARDOUS! ALL SHOULD BE USED WITH EXTREME CAUTION. THERE IS NO SUCH

THING AS A NON-HAZARDOUS SEALER.


WHAT PREPARATION IS REQUIRED? 

BILL HIRSH'S GAS TANK SEALER IS DESIGNED TO BE APPLIED RIGHT OVER LIGHT SURFACE RUST. IF YOUR TANK SUFFERS FROM A

BUILD UP OF GUM AND SLUDGE DEPOSITS IT SHOULD BE PROFESSIONALLY STEAM CLEANED FIRST AND THEN BE TREATED WITH BILL HIRSCH GAS

TANK ETCH CLEANER


IS IT ALWAYS NECESSARY TO SEAL A TANK AFTER IT HAS BEEN CLEANED?

NO. SEALER IS A LAST RESORT. TANKS THAT ARE RUST AND GUM FREE THAT HAVE

NO PINHOLES OR LEAKS DO NOT NEED SEALER. IT IS HIGHLY RECOMMENDED THAT TANKS BE KEPT FULL

WITH FUEL AT ALL TIMES, ESPECIALLY DURING STORAGE. THIS PREVENTS CONDENSATION AND FURTHER

RUSTING. BUT IF VEHICLES ARE NOT USED FREQUENTLY OR ARE STORED FOR MORE THAN 2-3 MONTHS AT

A TIME, THEY SHOULD BE TREATED WITH BILL HIRSCH'S GASOLINE PRESERVATIVE AND STABILIZER. THIS

WILL KEEP THE GASOLINE FRESH FOR UP TO FIVE YEARS AND WILL ENSURE QUICK TROUBLE FREE

STARTING AFTER MONTHS OF NON USE.


CAN BILL HIRSCH'S SEALER BE RE-USED?

YES!! UNLIKE THE POR PRODUCT THAT MUST BE DISCARDED AFTER THE CAN IS OPENED, BILL HIRSCH'S


SEALER IS RE-USABLE IF IT IS NOT ALL USED IN ONE APPLICATION. 
FURTHER IF BILL HIRSCH SEALER

THICKENS AFTER A LONG PERIOD OF NON USE, IT CAN BE RE-THINNED WITH METHYL ETHYL KETONE (MEK).


CAN I REMOVE BILL'S HIRSCH' SEALER FROM THE INSIDE OF MY TANK?

YES, WHILE IT IS DIFFICULT, IT CAN BE REMOVED, WHERE OTHER SEALERS CANNOT.

PROFESSIONAL RADIATOR REPAIR SHOPS AND "READY-STRIP" SHOPS CAN EASILY DO THIS. YOU CAN ALSO

USE PAINT REMOVER AND METHYL ETHYL KETONE (MEK).


CAUTION!

BEFORE INTRODUCING SEALER INTO THE TANK, THE ENTIRE INTERIOR OF THE TANK MUST BE DRY. IF ONLY

ONE SMALL AREA OF THE TANK IS NOT DRY OR HAS FOREIGN MATTER THAT MAY KEEP THE SEALER FROM

ADHERING, THE SEALER WILL NOT STICK TO THOSE AREAS AND COULD COME LOOSE AND FLOAT AROUND

IN YOUR TANK AND EVENTUALLY COME THROUGH THE FUEL PICK UP TUBE AND CLOG THE FUEL PUMP AND

CARBURETOR. THE SOLVENT FOR THIS SEALER IS METHYL ETHYL KETONE (MEK). BEFORE INTRODUCING

ANY ADDITIVES TO FUEL TANK AFTER SEALER HAS BEEN INSTALLED, BE SURE THAT THE PRODUCT YOU

INTRODUCE DOES NOT CONTAIN (MEK). (MEK) CAN SOFTEN AND LOOSEN THE SEALER WHICH IN TURN CAN

CLOG YOUR FUEL LINES, CARBURETOR, ETC. AVOID USING "GUMOUT" OR SIMILAR PRODUCTS WHICH HAVE

BEEN KNOWN TO USE (MEK).

IF SEALER IS BEING USED IN A DIESEL TANK, THE TANK MUST BE THOROUGHLY CLEANED OUT

BEFORE INTRODUCING SEALER.- IF SEALER IS BEING USED IN A FIBREGLASS TANK, ALL OPEN EDGES OF TANK MUST BE SEALED SO THAT FUEL

CANNOT WICK ITS WAY THROUGH ANY OPEN EDGES- IF IN DOUBT, CALL US ON OUR TOLL FREE LINE.

FINAL NOTE!!

OVER 3 MILLION CANS OF BILL HIRSCH'S SEALER HAVE BEEN SOLD IN OVER 40 COUNTRIES SINCE IT WAS

INTRODUCED 40 YEARS AGO. MORE BILL HIRSCH SEALER HAS BEEN SOLD THROUGHOUT THE WORLD THAN

ALL OTHER BRANDS COMBINED. IT IS STILL THE LARGEST SELLING SEALER AND IS THE ONLY TYPE SEALER

USED IN AIRCRAFT. WE DO NOT KNOWINGLY SELL THIS PRODUCT FOR USE IN AIRCRAFT SINCE WE CANNOT

CONTROL ITS APPLICATION OR END USE.


FOR BEST RESULTS USE WHEN TEMPERATURE IS 60 F OR HIGHER.

FOR ADDITIONAL INFORMATION CALL TOLL FREE 1-800 828 2061

FAX 973 642 6161 WWW.HIRSCHAUTO.COM (E-MAIL) HIRSCHAUTO@AOL.COM

BILL HIRSCH AUTOMOTIVE PRODUCTS * 396 LITTLETON AVE., NEWARK, NJ 07103

Customer reviews
Shopping Satisfaction
 5/5
Size : 16 US FL OZ (0.473 litre)
Not for own use.
Matthew I.
Shopping Satisfaction
 5/5
Size : 16 US FL OZ (0.473 litre)
I'm new to using this stuff, but if you do as per the instructions it work brilliantly.
Gary D.
 
Follow @RatSport