|
| |  Plastic clip to hold extruding 1/8" badge pins into panel hole. Universal application | Discount on quantity | | From | 10 | 20 | 100 | | Discount | 5.00% | 10.00% | 39.00% |
(Code: 230) |
|
| |  The top button section is fitted to the top of the material and this bottom socket section to the underside of the material. This then pops onto the base stud section.
Bright nickel finish
Bottom Socket| Discount on quantity | | From | 10 | 25 | 100 | | Discount | 5.00% | 10.00% | 40.00% |
(Code: 70) |
|
| |  This eyelet section is used in place of Material Inner Section stud in certain applications eg hood frame internal bar wrap around cloth section.
Bright nickel finish
Eyelet| Discount on quantity | | From | 10 | 25 | 100 | | Discount | 5.00% | 10.00% | 40.00% |
(Code: 965) |
|
| |  This top button section is fitted to the top of the material and the bottom socket section to the underside of the material. This then pops onto the base stud section.
The top button can be supplied in bright nickel or black enamelled
Top Button| Discount on quantity | | From | 10 | 25 | 100 | | Discount | 5.00% | 10.00% | 40.00% |
(Code: 69 Nickel) |
|
| |   Steel weatherseal clip. Holds the rubber door weatherstrip (the seal between the door and the door glass) onto the door
Original equipment for many UK 50s to 80s UK vehicles including BL, Jaguar, MG, Triumph etc. | Discount on quantity | | From | 10 | 20 | 100 | | Discount | 5.00% | 10.00% | 39.00% |
(Code: 229) |
|
| |   Steel door trim pad clip. Snap fit into 1/4" panel hole. Original equipment for many UK 50s to 80s UK vehicles including BL, Jaguar, MG, Triumph etc. | Discount on quantity | | From | 10 | 20 | 100 | | Discount | 5.00% | 10.00% | 39.00% |
(Code: 228) |
|
| |   Two hole fixing
Material Section - material is placed between these 2 sections.
Nickel plated brass| Discount on quantity | | From | 10 | 15 | 50 | 100 | | Discount | 10.00% | 25.00% | 39.00% | 69.00% |
(Code: 672) |
|
| |  The top button section is fitted to the top of the material and the bottom socket section to the underside of the material. This then pops onto this base stud. The base stud can be fitted with either rivets of self-tapping screws
Bright nickel finish
Base Stud | Discount on quantity | | From | 10 | 25 | 100 | | Discount | 5.00% | 10.00% | 40.00% |
(Code: 71) |
|
| |   Self adhesive on underside.
Meets FIA & MSA regulations
Measures 100mm each side | Discount on quantity | | From | 2 | 5 | 10 | 50 | 100 | | Discount | 10.00% | 12.00% | 20.00% | 40.00% | 45.00% |
(Code: 995) |
|
| |   Two hole fixing
Body Section
Nickel plated brass| Discount on quantity | | From | 10 | 15 | 50 | 100 | | Discount | 10.00% | 25.00% | 39.00% | 69.00% |
(Code: 671) |
|
| |   Lift the Dot fastener with self-tapping screw.
Length 29mm| Discount on quantity | | From | 15 | 50 | 100 | | Discount | 20.00% | 30.00% | 35.00% |
(Code: 1000) |
|
| |   Lift the dot fastener with woodscrew base.
Length 32mm| Discount on quantity | | From | 15 | 50 | 100 | | Discount | 20.00% | 30.00% | 35.00% |
(Code: 1001) |
|
| |  Suits all standard type (not FIA type) battery isolators.
Good quality version with steel turn tab on base| Discount on quantity | | From | 2 | 5 | 10 | 50 | 100 | | Discount | 10.00% | 12.00% | 20.00% | 40.00% | 45.00% |
(Code: 835) |
|
| |   Robust black ABS in-line fuse holder. Screw thread enables splashproof construction (unlike commonly available white nylon push and turn type).
Supplied complete with 3A fuse but doubtless you will wish to fit your own fuse. Compatible with glass or ceramic fuses.
Suitable for adding alarm, lighting or any other ancillaries, or sorting electrical issues.| Discount on quantity | | From | 2 | 5 | 50 | | Discount | 10.00% | 25.00% | 45.00% |
(Code: 1023) |
|
| |  Used to attach the exhaust wrap to the manifold & exhaust.
Very strong & heat proof
200mm by 5mm
Best quality 304 grade stainless(Code: 261EACH) |
|
| |   Used for material to material fastening| Discount on quantity | | From | 15 | 50 | 100 | | Discount | 20.00% | 30.00% | 35.00% |
(Code: 1003) |
|
| |   Lift the Dot fastener with M5 machine screw base.
| Discount on quantity | | From | 15 | 50 | 100 | | Discount | 20.00% | 30.00% | 35.00% |
(Code: 1002) |
|
| | 
Used to attach the exhaust wrap to the manifold & exhaust.
Very strong & heat proof
300mm x 5mm
Best quality 304 grade stainless (Code: 750 x 1) |
|
| |  12V 55W
| Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: H1H) |
|
| |   Double thickness screw base stud. Countersunk screw holes for size 6 screws;
Hole centres 18mm
Base plate approx 26mm x 12mm x 2mm thick | Discount on quantity | | From | 15 | 50 | 100 | | Discount | 20.00% | 30.00% | 35.00% |
(Code: 998) |
|
| |   Female (material) section| Discount on quantity | | From | 15 | 50 | 100 | | Discount | 20.00% | 30.00% | 35.00% |
(Code: 999) |
|
| |   Shrouded key suits all FIA type battery isolators
Good quality version with brass turn tab on base.
Hole is for remote cable operation if required.
| Discount on quantity | | From | 2 | 5 | 10 | 50 | 100 | | Discount | 10.00% | 12.00% | 20.00% | 40.00% | 45.00% |
(Code: 835/FIA) |
|
| |   Robust black PVC in-line fuse holder. Cover enables splashproof construction.
Suitable for heavier duty applications up to 32 volts, 100 amps.
Suitable for adding alarm, lighting or any other ancillaries, or sorting electrical issues.| Discount on quantity | | From | 2 | 5 | 50 | | Discount | 10.00% | 25.00% | 45.00% |
(Code: BFuse) |
|
| |   Used for fitting belts or harnesses to vehicle shell (floorpan, roll bar etc)
Universal fit
7/16" UNF thread size, 1" thread length
| Discount on quantity | | From | 10 | 100 | | Discount | 20.00% | 50.00% |
(Code: 667) |
|
| |  
Spare dust & rain cover.
Suits all red key type isolators, standard & FIA type | Discount on quantity | | From | 2 | 5 | 10 | 50 | 100 | | Discount | 10.00% | 12.00% | 20.00% | 40.00% | 45.00% |
(Code: 1033) |
|
| |  
Tough transparent nylon body lets you observe filtering action.
Super fine paper element filter keeps fuel clean and free from all contaminants
Replace at each service (or when visibly dirty)
Note that our version of these commonly-available filters have a galvanised steel reinforcement around the filter cone for structural rigidity, enhanced performance and longevity.
Fitment at each end is stepped allowing fitment to either 1/4" (6mm) or 5/16" (8mm) hose
35mm diameter, 100mm long including stub pipes
| Discount on quantity | | From | 10 | 100 | | Discount | 30.00% | 70.00% |
(Code: GFE7004) |
|
| |  12V
60/55W| Discount on quantity | | From | 10 | | Discount | 20.00% |
(Code: 496) |
|
| |   ABS base with stainless toggle
Contacts at side rather than base creates a slim profile (15mm) for fitments where available depth may be an issue
Require 12mm panel hole
12volt, maximum of 15 amp
Our best selling switch | Discount on quantity | | From | 10 | 25 | | Discount | 20.00% | 40.00% |
(Code: 570) |
|
| |   ABS base with stainless toggle
Removeable legend plate - switch can be fitted with or without label
Requires 12mm panel hole
25 Amp| Discount on quantity | | From | 10 | 25 | | Discount | 20.00% | 40.00% |
(Code: 679On/Off) |
|
| |   ABS base with stainless toggle
Removeable legend plate - switch can be fitted with or without label
Suits relay changeovers, sidelights & headlights etc
Requires 12mm panel hole
25 Amp| Discount on quantity | | From | 10 | 25 | | Discount | 20.00% | 40.00% |
(Code: 679On/On) |
|
| |   Heavy duty battery terminal clamps.
Good quality manufactured by Semat (not unbranded electro-plated Chinese imports).
Due to top quality copper construction clamps are flexible enough to fit both positive and negative terminals, and are labeled as such
Fasteners included.
Sold as a pair
| Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: BT) |
|
| |   12Volt 30Amp 4 pin relay
Suitable uses being horns, spotlamps
| Discount on quantity | | From | 10 | 50 | 100 | | Discount | 20.00% | 40.00% | 49.00% |
(Code: HR) |
|
| |   DESCRIPTION: Push on PVC 'U' channel with internal lips for extra grip. Flexible segmented steel core. Hardwearing & washable.
USE: Universal - anything with an edge. (boat, car, aircraft, construction etc.) Will grip all edges 0.5mm to 2mm wide
Widely used for SVA purposes on kit car panels
Referred to as Titanfast seal in the marine industry
Black
Sold per metre| Discount on quantity | | From | 100 | | Discount | 30.00% |
(Code: SealEdgeTrimSmall) |
|
| |   Elegantly solves the problem of messy terminal connections and makes it very easy to connect extra power (or earth) leads to the battery (without disturbing the already present connections)
Fits positive & negative terminals.
Easy & reliable direct connection to battery
Stud will accommodate one or several ring terminals
Solid brass construction
10.5mm stud length, overall length 35mm
Fits all standard 5/16" battery clamp threads including Ford square terminal types - may not fit small lawnmower or motorbike battery clamps
Fits positive & negative terminals.
Sold individually | Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: BTCE) |
|
| |  2 pin 12v flasher relay
21w x 2
As Lucas SFB114 / SFB115 / SFB130 / GFU2124| Discount on quantity | | From | 10 | 50 | 100 | | Discount | 20.00% | 40.00% | 49.00% |
(Code: 878) |
|
| |   Pair PVC Battery Terminal Clamp Covers.
Suit square terminal clamps
Maximum input cable diameter 20mm
| Discount on quantity | | From | 10 | | Discount | 40.00% |
(Code: BTCCS) |
|
| |   DESCRIPTION: Push on PVC 'U' channel with internal lips for extra grip. Flexible segmented steel core. Hardwearing & washable.
USE: Universal - anything with an edge. (boat, car, aircraft, construction etc.) Will grip all edges 0.5mm to 4mm wide
Widely used for SVA purposes on kit car panels
Referred to as Titanfast seal in the marine industry
Black
Sold per metre| Discount on quantity | | From | 100 | | Discount | 30.00% |
(Code: SealEdgeTrimLarge) |
|
| |  3 pin 12v flasher relay
21w x 2
As Lucas SFB105 / GFU2103 / GFU103| Discount on quantity | | From | 10 | 50 | 100 | | Discount | 20.00% | 40.00% | 49.00% |
(Code: 879) |
|
| |  Battery isolator (also known as cut-off or kill switch)
A very simple way to isolate vehicle electrics. Can be used either as an Anti-Theft device or to isolate either the starter battery from the rest of the vehicle or auxiliary batteries from the charging system.
(Code: 967-177967) |
|
| |   Best quality enamel die cast badges
Measures 38mm wide, 22mm high, 2mm deep| Discount on quantity | | From | 10 | 25 | 50 | | Discount | 25.00% | 30.00% | 40.00% |
(Code: 677) |
|
| |  Insulating Wrap is an innovative way to create more horsepower and reduce under-bonnet temperatures.
Withstands intermittent temperatures of 2000 degrees F (1090C) and continuous temperatures of 1600 degrees F (870C).
| Discount on quantity | | From | 10 | 25 | | Discount | 35.00% | 41.00% |
(Code: 749746 1) |
|
| |   Best quality enamel die cast badges
Measures 38mm wide, 22mm high, 2mm deep| Discount on quantity | | From | 10 | 25 | 50 | | Discount | 25.00% | 30.00% | 40.00% |
(Code: 677GC) |
|
| |   Best quality enamel die cast badges
Measures 38mm wide, 22mm high, 2mm deep | Discount on quantity | | From | 10 | 25 | 50 | | Discount | 25.00% | 30.00% | 40.00% |
(Code: 677/C) |
|
| |   DESCRIPTION: Push on rubber 'U' section co-extruded with 1/2" (12.7mm) sponge rubber tube.
Flexible steel spine.
Fits over lips from 1.0 - 4.0mm wide
Seal compresses to less than 3mm to allow easy door, bonnet and boot closure.
As supplied for boot/tailgate seal for Classic Mini, Classic MG, Triumph as well as a whole host of other 60s & 70s British classics as well as being OE seal for MG mudguard scuttle.
It is also ideal as universal trunk / boot seal. Also lid / container weatherstrip, boat hatch seal etc.
Black
Sold per metre | Discount on quantity | | From | 50 | 100 | | Discount | 30.00% | 40.00% |
(Code: SealBoot) |
|
| |   DESCRIPTION: Push on rubber 'U' section co-extruded with .47" (12mm) wide sponge rubber bulb.
Flexible steel spine.
Fits over lips from1.0 - 4.0mm wide
Seal compresses to less than 3mm to allow easy door, bonnet and boot closure.
As supplied for Classic MG, Classic Mini, Land Rover, Triumph as well as generic universal use
Black
Sold per metre| Discount on quantity | | From | 50 | 100 | | Discount | 30.00% | 40.00% |
(Code: SealDoor) |
|
| |   Lucas type toggle switch as fitted to most British cars of the 50s, 60s, 70s. Also suitable universal fitment.
Robust build with ABS plastic on stainless housing with stainless bezel, copper rear contacts
Require 12mm panel hole
Off/On)
12volt, maximum of 25 amp| Discount on quantity | | From | 10 | 25 | | Discount | 20.00% | 40.00% |
(Code: 487Off/On) |
|
| |   Designed to keep water and mud out of the connector plug
| Discount on quantity | | From | 5 | 10 | | Discount | 10.00% | 25.00% |
(Code: AND Cover) |
|
| |   As Lucas WSB131 and WSB129
Takes standard 3/16" (4mm) tubing, requires (8mm) fitment hole.
Suitable for up to 4mm thick panels but can be bonded into thicker GRP panels.
Manufactured from stainless & chrome with brass locator.
Available as twin washer jet (2 nozzles in each body) or single washer jet (single nozzle in each body)
| Discount on quantity | | From | 10 | 25 | 50 | | Discount | 25.00% | 30.00% | 40.00% |
(Code: 23) |
|
| |   Battery terminal & isolator assembly
Fits all standard top post batteries including Ford square type - note will not fit small terminal motorbike batteries
Install on battery terminal post & simply connect battery cable to back of the switch
To engage power just hand tighten the green knob and just slightly loosen the green knob to disconnect all power. The green knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing
Ideal for classic vehicles which can suffer from "leaky" earths, slowly draining batteries.
140Amp continuous at 12V, 500Amp momentary (10 seconds)
12 volt or 24 volt
Click pic for fitted example| Discount on quantity | | From | 2 | 5 | 10 | 50 | 100 | | Discount | 10.00% | 12.00% | 20.00% | 40.00% | 45.00% |
(Code: 182) |
|
