Supplied with universal adapter brackets for ease of fitting.
All fans can be mounted in front or behind the radiator - easily reversible depending on whether you wish to pull or push air
All fans are 12 volt.
Curved blade design provides maximum output for given size and consumption.
Many radiators will accommodate two fans fitted to increase cooling efficiency.
Fan Measurements:
All fans measure 29mm wide at the circumference, the width at widest central bearing point differs per motor size as quoted below.
Fan size quoted is blade diameter, the housing adds approx 1/2" either side, so for example a 7" fan has a fan diameter of 7" and an overall diameter of 8".
Note that Cubic Feet Minute measurement is quoted with the fan mounted as a "sucker" (behind the radiator), if fitted as a "blower" (in front of the radiator) then the output is approximately 30% less.
- 7 inch (capacity 480 Cubic Feet Minute, consumption 5.3) Width of fan at widest point (bearing point) 58mm
- 9 inch (capacity 720 Cubic Feet Minute, consumption 5.4) Width of fan at widest point (bearing point) 58mm
- 10 inch (capacity 860 Cubic Feet Minute, consumption 5.5) Width of fan at widest point (bearing point) 63mm
- 12 inch (capacity 1430 Cubic Feet Minute, consumption 7.6) Width of fan at widest point (bearing point) 63.5mm
- 14 inch (capacity 1990 Cubic Feet Minute, consumption 10.5) Width of fan at widest point (bearing point) 74.5m
- 16 inch (capacity 2540 Cubic Feet Minute, consumption 12.9) Width of fan at widest point (bearing point) 76mm
|