Already registered? Enter your email and password:First Visit?Create an account
Search Your Cart

Tubes, Mounts, Adapters, Sleeves Etc

The components on this page, when mated with appropiate silencers as available on this site, enable the construction of a custom exhaust.
All our exhaust components are 16/18 guage - allowing you to construct the best exhaust possible for your vehicle.

(Code: 293)
In Stock
Exhaust O Ring Hanger RubberExternal diameter 45mm
(Code: 197)
In Stock
Exhaust Strap RubberLength 70mm
Quality reinforced rubber
Can be cut to size if required (although obviously you'd have to redrill a hole!)
(Code: 199)
Exhaust Figure 8 Hanger RubberLength 48mm
Width (at widest point) 38mm
Depth 25mm
(Code: 198)
Stainless Mikalor Bolt Drive ClampGenuine W2 Mikalor EEC manufactured stainless clamp.
Designed and manufactured to the highest standards using stainless steel bands and zinc plated screws. The design of the screw mechanism means that is impossible to lose the screw and trunnion and the bevelled edges of the band gives protection against abrasion.
The design of these clamps and material specification means they are ideal for motorsport applications. The screw and trunnion is designed to give increased clamping grip for high pressure use. These clamps are suitable for use on hoses and exhaust systems, the relatively thin band design allows installation where pipes run close together, such as manifold Y pieces and collectors.
These have the disadvantage of being very size specific so care must be taken to check hose diameter before ordering.

(Code: MK1)
In Stock
Exhaust Assembley Paste 140gExhaust Assembly Paste will withstand extreme temperatures and provide carbon monoxide proof joints on all exhaust systems
(Code: 805)
In Stock
Exhaust Mounting Bobbin RubberUniversal cotton reel exhaust mount
Length 45mm, diameter 33mm
(Code: 195)
In Stock
Exhaust Perforated StripSemi-rigid perforated steel strip
61cm (24") long
Facilitates hanging of silencers
Click thumbnail to see in use
(Code: 610)
Available in 10 days
Exhaust TubeSupplied in 1 metre lengths
16/18 guage
(Code: 188 114)
In Stock
Bend 90 Degree16 guage
(Code: 189 1 12)
In Stock
Bend 45 Degree16 guage
(Code: 190 112)
In Stock
Y PieceAvailable in various sizes
(Code: 272)
In Stock
Exhaust Pipe Expander ToolThis clever tool will flare & expand exhaust and tail pipes, to enable one pipe to slide inside another.
It will also straighten out of shape pipes and pipes damaged by clamps
Supplied as a set of 3 expander tools in an ABS storage/carry case.
Small suits pipes 29 - 43mm
Medium suits pipes 39 - 58mm
Large suits pipes 53 - 82mm
(Code: Ex Tool)
Follow @RatSport