Already registered? Enter your email and password:First Visit?Create an account
Shop
Search Your Cart

Headlights

Sealed beam units are getting increasingly thin on the ground, however we still have a few left both in standard and high output.
Many owners find them insufficiently bright for todays motoring conditions and wish to upgrade. A common solution is to convert to halogen units, these are a direct straight swap as the replaceable halogen bulb has the same electrical pin layout as a sealed beam (3 pin on H4 and single pin on H1) so no wiring connections modification is required. Conversion to halogens has the advantage that 1) when a bulb goes it is easily and cheaply replaced (unlike sealed beams the whole unit does not require replacement) and 2) affords a brighter output which is an obvious benefit to classic owners who use their vehicle of a nighttime. The disadvantage for concours buffs is that when examined closely the difference between an original sealed beam and a halogen replacement can be noticed.
Alternatively we can supply 7" LED lamp units as a direct swap for those owners with 7" sealed beams. These are as bright or brighter than any other factory-fit lamps on even the most modern vehicles. LED units for 53/4" are in the pipeline.

All lamp units are supplied individually unless stated otherwise



(Code: SBI)
13.20
7" Sealed BeamThese are twin filament 7" sealed beam units. Output power is 60w (high beam) 45w (low beam).
Uses standard 3 point pin for simple fitting direct wiring terminal
(Code: 366RHD)
20.41
7" Sealed Beam High OutputThese are twin filament 7" sealed beam units. Output power is 75w (high beam) 50w (low beam), which is a marked improvement on the 60w/45w of standard units, without the trouble of changing to halogen.
Fitted with the small clear window to allow a sidelight (if your vehicle has one) to shine through.
Uses standard 3 point pin for simple fitting direct to wiring connection
Suits all RHD vehicles fitted with 7" twin filament beam units. (Not available in LHD)
(Code: 158)
21.40
7" H4 Halogen Lamp (Direct Replacement for 7" Sealed Beam)These are twin filament halogen light units.
Supplied complete with H4 60/55w halogen bulb (other wattage bulbs may be fitted if required).
Complete with sidelight facility (may be utilized if your vehicle has sidelights, or ignored if it doesnt)
Ideal for conversion of filament bulb or sealed beam units to halogen.
Suits all vehicles fitted with 7" twin filament beam units.
Lucas Lub385 type
(Code: 980RHD)
21.60
5.75" H4 Halogen Lamp (Twin Beam) Direct Replacement for 53/4" Sealed BeamThese are twin filament halogen light units.
Supplied complete with H4 60/55w halogen bulb (other wattage bulbs may be fitted if required).
Suits all vehicles fitted with 5.75" twin filament beam units.
Ideal for conversion of filament bulb or sealed beam units to halogen.
Housings slightly domed by approx 4mm as per original beam units
Employed as the outer lamp units in classic 4-lamp headlight set ups (eg Triumph Stag, Vitesse, Rover P6, Scimitar, Hillman Avenger, as well as many US 60s and 70s classics such as Impala, Biscayne, Fairlane, Cadillac, Galaxie and many others) etc) as well as individually in classic bikes.
(Code: 981RHD)
21.70
5.75" H1 Halogen Lamp (Single Inner Beam) Direct Replacement for 53/4" Sealed BeamThese are single filament halogen light units.
Supplied complete with H1 60w halogen bulb (other wattage bulbs may be fitted if required).
Suits all vehicles fitted with 5.75" twin filament beam units.
Ideal for conversion of filament bulb or sealed beam units to halogen.
Housings slightly domed by approx 4mm as per original beam units.
Employed as the inner lamp units in classic 4-lamp headlight set ups (eg Triumph Stag, Vitesse, Rover P6, Scimitar, Hillman Avenger, as well as many US 60s and 70s classics such as Impala, Biscayne, Fairlane, Cadillac, Galaxie and many others)

(Code: 982R)
76.80
7" P700 Tripod HeadlampsThese are twin filament halogen light units.
P700 Tripod headlamps, as fitted to 50s & 60s Triumph TRs, Jaguars, Cobras etc.
Supplied complete with H4 60/55w halogen bulb (other wattage bulbs may be fitted if required).
Complete with sidelight facility (may be utilized if your vehicle has sidelights, or ignored if it doesnt)
Use to discreetly upgrade lighting systems on classic vehicles to modern standard, or will fit to any vehicle taking 7" headlamps for a retro look.
Utilises standard 3 point pin for simple fitting direct to bulb
Priced & sold as a pair

click here to see more pics these lights fitted
(Code: 285)
89.74
7" Headlamp Unit Complete7" Complete Headlamp Unit
Supplied with plastic backing bowl, grommet, rubber gasket, chrome trim, mounting & adjusting screws, glass lamp unit to take H4 halogen bulb (or tungsten equivalent etc), wiring tails etc.
Supplies high & low beam and optional sidelight
Backing bowl will accept all standard 7" glass lamp units, (including all those supplied by ourselves) should a replacement ever be needed.
SVA approved & E-marked.
Depth 164mm, fits in 160mm diameter hole
Priced & sold as a pair
(Code: HLC)
193.20
7" LED Lamp (Direct Replacement for 7" Sealed Beam)These are twin filament LED light units.
High & low beam complete with sidelight (may be utilized if your vehicle has sidelights, or ignored & not wired if it doesnt).
Contains 1 piece 17w super bright LED, 4 piece 3w super bright LED, 2 piece LED for sidelight (position light).
IP67 rated aluminium housing with polycarbonate lens.
Ideal for conversion of filament bulb or sealed beam units to LED.
Suits all vehicles fitted with 7" twin filament beam units.

(Code: 980/LEDRHD)
 
Follow @RatSport