Already registered? Enter your email and password:First Visit?Create an account
Shop
Search Your Cart

Battery Selector

Enables easy switching between batteries.

Usefully deployed in boats, campers etc to use one battery while parked up for lights, radio, fridge, and other leisure applications, and then switch to main battery when you fire the motor up again without worrying that it will be flat. Then put switch to both batteries once running so as the alternator will recharge the leisure battery.
Make before break design means that memories (eg on radio) are retained during switchover
(Code: 735)
28.80
Battery Selector Switch SmallMake Before Break Design
For use with two or more Batteries (and single or dual engine systems on marine applications)
Permits selection between batteries for starting and charging or operation of both batteries in parallel.
Allows addition of an extra battery for use with accessories.
The "OFF" position also acts as an Emergency Disconnect in the event of an electrical problem.
Ignition protected.
Suitable for 12, 24 & 36 volt systems
300 amps continuous, 660 amps intermittent at 12V
Copper, stainless & ABS construction
Small profile, can be surface or panel mounted.
Overall height 75mm, height above panel fitting surface 45mm (if panel mounted)
(Code: 626)
39.60
Battery Selector SwitchMake Before Break Design
For use with two or more Batteries (and single or dual engine systems on marine applications)
Permits selection between batteries for starting and charging or operation of both batteries in parallel.
Allows addition of an extra battery for use with accessories.
The "OFF" position also acts as an Emergency Disconnect in the event of an electrical problem.
Ignition protected.
Surface Mount - design protects the copper contacts and brass terminals used as electrical connections.
Suitable for 12, 24 & 36 volt systems
320 amps continuous, 500 amps intermittent (max 5 minutes) at 12V
Dimensions 160mm diameter by 70mm height.
(Code: 716)
 
Follow @RatSport